BASIC OPERATION
9
4. BASIC OPERATION
4.1 Live Page
Depending on the DVR you have, you may see the following live view screen with status icons.
Icon Function Icon Function Icon Function Icon Function
Key lock
Key unlock
The 1
st
live audio
channel
The 2
nd
live audio
channel
3
rd
live audio channel
4
th
live audio channel
The 1
st
playback
audio channel
The 2
nd
playback
audio channel
The 3
rd
playback
audio channel
The 4
th
playback audio
channel
Audio channel
unselected
Digital zoom mode
Digital zoom
unselected
HDD overwrite Timer recording
Motion
Recording
Alarm
R.E.T.R. on
(Selected models only)
R.E.T.R. delay
(Selected models only)
4.2. Recording
When the recording and the pre-alarm function are activated, this device will overwrite 8GB data from the oldest
for continuous recording without notice.
1) Manual Recording Icon
By defaults, when the DVR is properly connected with cameras and the HDD is installed, you can see “ ”
(recording) on the screen.
2) Event Recording Icon
When the motion / alarm detection is activated, once motion or external alarm happens, you will see “ ” (motion)
or “ ” (external alarm) on the screen.
3) Timer Recording Icon
When the timer record is activated, you will see the LED light of “Timer” is on, and “ ” (timer) on the screen.
To Next Page
Loading...
Need help?
General
