REMOTE OPERATION
25
NO. Button Function Description
For details, please see “Miscellaneous Control” at page 25.
4
/
Record / Record Stop Click to start / stop the manual recording.
5
Snapshot
Click to take a snapshot of the current view. The snapshot will be
saved in the path you specified in “Record Setting”.
6
Information Click to show the current network connection details.
7
DVR Control
Click to go to the DVR control panel to operate the DVR
remotely.
Miscellaneous Control
Click “ ” (Miscellaneous Control) on the control panel, and six functions are available as follows:
Button Function Description
Color Setting
Click this button to adjust the brightness / contrast / hue / saturation
for a single channel or the whole channels.
Backup
To make a video backup remotely, click this button, and you will go
to the download setting page.
Record Setting Click to go to the detailed record setting.
Server Setting Click to go into the detailed DVR setting.
Tools
Click to update the firmware version, multilingual OSD and boot
display of your DVR remotely.
Status List
Click to view all event and recording logs, search the desired log(s)
by date, or playback the recording of the selected log.
6.1.3. General Operation
Record
To record remotely at the same time when any event alarm is triggered at the DVR side, click “ ”
(Miscellaneous Control) → “ ” (Record Setting) to go to the “Record Setting” page.
In the “Record Setting” page, you can set the following items:
‧Record type
To Next Page
Loading...
Need help?
General
