Avtech AVC799B - Display

MAIN MENU
25
1) E-MAIL ALERT
Select “ON” to enable this function, or “OFF” to disable this function.
2) SMTP SERVER
Enter the SMTP server address provided from your e-mail system supplier.
3) PORT
Enter the port number provided from your e-mail system supplier. If this column is left blank, the e-mail
server will use port 25 to send e-mails.
4) MAIL FROM
Enter the sender’s name.
5) SSL ENCRYPTION
Select “ON” if your e-mail server is using SSL encryption to protect your e-mail content from unauthorized
access.
6) VERIFY PASSWORD
Some mail servers are required to verify the password. Please enter the “user name” and “password”.
7) USER NAME / PASSWORD
Enter the “user name” and “password” when “VERIFY PASSWORD” is set to “ON”.
8) RECEIVER
Select “SETUP” to add up to 15 e-mail addresses of the assigned recipients.
5.5.6 DISPLAY
ADVANCED CONFIG
CAMERA DE-INTERLACE (For AVC799B & AVC797B Only) OFF
DETECTION FULL SCREEN DURATION 03
ALERT QUAD SCREEN DURATION (For AVC799B & AVC797B Only) 03
NETWORK DWELL SCREEN DURATION 03
DISPLAY DISPLAY COVERT ON
RECORD HDD DISPLAY MODE HDD SIZE
DEVICES ALPHA BLENDING 200
DCCS VGA OUTPUT 1024 X 768
IVS
NOTIFY
EXIT
1) DE-INTERLACE (For AVC799B & AVC797B Only)
Select to enable or disable the de-interlace function (ON / OFF).
Note: If you set the recording image size as “FRAME”, please TURN ON de-interlace function.
If you set the recording image size as “CIF”, please TURN OFF the de-interlace function.
2) FULL SCREEN DURATION
Select the full screen dwell duration time in second (03 / 05 / 10 / 15).
3) QUAD SCREEN DURATION (For AVC799B & AVC797B Only)
Select the quad screen dwell duration time in second (03 / 05 / 10 / 15).
4) DWELL SCREEN DURATION
Select the duration time in second for the CALL monitor function (03 / 05 / 10 / 15).
5) DISPLAY COVERT
Select “ON” or “OFF” to display or hide the wording “COV.” When covert recording is activated in
“CAMERA”.