EasyManua.ls Logo

Avtech AVC799B - Record

Avtech AVC799B
66 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MAIN MENU
26
6) HDD DISPLAY MODE
Select “SIZE” to show the remaining HDD capacity for recording in GB, or “TIME” to show the remaining
recording time.
7) ALPHA BLENDING
Click to manually adjust the transparent level of the main menu.
8) VGA OUTPUT
Select the VGA resolution you want. There are three options as follows:
1024 x 768 (default) 1280 x 1024 1600 x 1200
Note: To have the best image quality on your LCD monitor, make sure (1) the selected DVR VGA output
resolution is supported by your monitor, and (2) the VGA output settings on both the LCD monitor
and DVR are consistent.
If the image is not positioned or scaled properly, please go to your monitor’s menu for adjustment.
For details, please refer to the user manual of your LCD monitor.
5.5.7 RECORD
Note: Please DO NOT change the date or time of your DVR after the recording function is activated.
Otherwise, the recorded data will be disordered and you will not be able to find the recorded file
to backup by time search. If users change the date or time accidentally when the recording
function is activated, it’s recommended to clear all HDD data, and start recording again.
ADVANCED CONFIG
CAMERA MANUAL RECORD ENABLE ON
DETECTION EVENT RECORD ENABLE ON
ALERT TIMER RECORD ENABLE ON
NETWORK PRE-ALARM RECORD ON
DISPLAY OVERWRITE ON
RECORD EVENT RECORD ALL CHANNEL OFF
DEVICES KEEP DATA LIMIT (DAYS) OFF
DCCS RECORD CONFIGURATION SETUP
IVS
NOTIFY
EXIT
1) MANUAL RECORD ENABLE
Set the manual recording function on / off.
2) EVENT RECORD ENABLE
Set the event recording function on / off.
3) TIMER RECORD ENABLE
Set the timer recording function on / off.
4) PRE-ALARM RECORD
Select to enable or disable the pre-alarm function (ON / OFF).
When pre-alarm and event recording functions are both activated, the DVR will record 8MB data before an
alarm / motion event is triggered.
5) OVERWRITE
Select “ON” to overwrite previous recorded data in your HDD when the HDD is full. When this function is on
and the HDD is full, the DVR will clear 8GB data from the oldest for continuous recording without notice.

Related product manuals