Avtech Room Alert User Manual

AVTECH Software Inc. 13
Room Alert 26W Conguration And Setup Screens
Email-To-SMS
Email alert notications can be sent via Short Message Service (SMS) to computers, mobile phones,
alphanumeric pagers and PDAs using SMS text messaging in addition to regular email. This
functionality is widely supported by current mobile device service providers and is accomplished by
sending email to an email address, formatted in a way dened by the service provider being used for the
target mobile device.
For example, Verizon’s email address format for sending an email alert to a mobile device using SMS
text messaging is ‘<10 digit mobile device number>@vtext.com’ with ‘<10 digit mobile device number>’ being
replaced by the area code and phone number of the mobile device without dashes, spaces or a ‘1’ in front
of the area code.
If the specic format for your service provider is not known, AVTECH provides a database in the
‘Support’ section of the AVTECH.com website that contains the email-to-SMS format for many available
service providers. This is the largest database of this type on the web. However, if your service provider is
not listed, please contact them by phone for the proper format and be sure that the mobile device being used
has text messaging capability enabled. If you learn of a new or changed format, please email this with your
contact information to Support@AVTECH.com so we may conrm it and post it online for the convenience
of other users.
SNMP
The Room Alert 26W unit is fully SNMP compliant and can be monitored by applications capable of
performing an SNMP Query or Get request. The Room Alert 26W unit can also be congured to send
SNMP Traps to up to three separate IP addresses when thresholds are exceeded. The bundled PageR
software offers the ability to initiate SNMP Queries to and receive SNMP Traps from the Room Alert
26W unit. PageR can be used if desired, enabling advanced alerting and automatic corrective action
features. If another application is used to monitor the Room Alert 26W unit, be sure to obtain the MIB
les for the Room Alert 26W unit from the ‘Downloads’ section of the AVTECH.com website or the
most recent AVTECH Update CD.

Avtech Room Alert Specifications

General

Device Type	Environmental Monitoring Device
Monitored Parameters	Temperature, Humidity, Water, Power, Motion, Airflow, Light, Sound
Connectivity	Ethernet
Alerting Methods	Email, SMS, SNMP
Power Source	AC Power (100-240V), Optional Battery Backup
Operating Temperature	32°F to 122°F (0°C to 50°C)
Dimensions	Varies by model
Weight	Varies by model
Compatibility	SNMP, Web browsers
Warranty	Varies by model, typically 1 year