OXYGEN REMOTER - SETTINGS|MONITORS SECTION
OXYGEN 1000 & OXYGEN 2000 · User Manual · ENG
C. STUDIO SPEAKERS (SPK-STD)
This section is used for the management of the STUDIO SPEAKERS .
By the mouse you can move the rotary control knobs allow you to
amplify/attenuate the audio level.
The CRM-SPEAKERS audio level goes from 0 % to 99 % is the maximum
allowed level. Can set the maximum level by going to this page:
SETUP / AUDIO / OUTPUTS / MONITOR / SPEAKER / SPK-STUDIO
The step of the CRM-SPEAKERS adjustment is 1 dB and the level goes
from -80 dB to the maximum of +19 dB.
By pressing on you can 🔇mute or unmute the SPK-STD
speakers if it is already muted.
To unmute the speakers just press again or increase/decrease the audio level by
rotating the related surface control and confirm that by clicking on the same knob.
The Speaker’s level is displayed in the bottom-right section of the HDMI display.
To Next Page