AxelTech OXYGEN1000 - Page 92

92
TECH SPECS|NAVIGATION MODE - ACTIVATION
OXYGEN 1000 & OXYGEN 2000 · User Manual · ENG
Max Input Level (clipping point)
+7dBu
A/D conversion
24 bit / 48 Khz
Signal to Noise Ratio (referred to peak level)
>90dB
THD+N
<0,01%
Analog Gain
Adjustable +0 ÷ +60dB (3dB step)
Phantom Power
+48V
Analog Balanced Telco Input
(shared with MIC5, mutually exclusive)
Connector
XLR Balanced – EMI Suppressed
Input Impedance
2,4Kohm
Nominal Input Level (sensitivity)
0dBu
Max Input Level (clipping point)
+18,5dBu
A/D conversion
24 bit / 48 Khz
Signal to Noise Ratio (referred to peak level)
>90dB
THD+N
<0,01%
Analog Balanced Stereo Outputs
Connector
XLR Balanced – EMI Suppressed
Output Impedance
23ohm, nominal 600ohm
Nominal Output Level
0dBu
Max Output Level (clipping point)
+18,5dBu
D/A conversion
24 bit / 48 Khz
Signal to Noise Ratio (referred to peak level)
>100dB
Stereo Separation (referred to peak level)
>90dB
THD+N
<0,002%
Analog Unbalanced Stereo Outputs
Connector
RCA Unbalanced – EMI Suppressed
Output Impedance
nominal 560ohm