26
AXIS 207W/AXIS 207MW - Event Config
Motion Detection
The motion detection feature is used to generate an alarm whenever movement occurs (or
stops) in the video image. A total of 10 Include and/or Exclude windows can be configured
(for example seven include windows, and three exlude windows).
• Included w
indows target specific areas within the whole video image
• Ex
cluded windows define areas within an Include window that should be ignored
(areas outside Include windows are automatically ignored)
Once configured, the motion detection windows will appear in the
list of available triggers,
for triggering events. See the section on Event Config above.
Note:
Using the motion detection feature may decrease the camera’s overall performance.
How to configure Motion Detection
1. Click Motion Det
ection in the Event Config menu.
2. Click Add Window.
3. Select the Include, or Exclude option.
4. Enter a descriptive name in the field below.
5. Adjust the size of the window (drag the bottom right-hand corner); and adjust the
position (click on the text at the top and drag to the desired position).
To Next Page
Loading...
Need help?
General
