40
AXIS 207W/AXIS 207MW - System Options
• the wireless settings
• Default - The default button should be used with caution. Pressing this will return
all of the camera's settings to the factory default values (including the IP address)
Upgrade Server - Se
e Upgrading the Firmware, on page 44.
Backup -
To take a backup of all of the parameters, and any user-defined scripts, click this
button. If necessary, it will then be possible to return to the previous settings, if settings
are changed and there is unexpected behavior.
Restore - click the Browse
button to locate the saved backup file (see above) and then click
the Restore button. The settings will be restored to the previous configuration.
Note:
Backup and Restore can only be used on the same unit running the same firmware. This feature is not
intended for the configuration of multiple units or for firmware upgrades.
Support
The support overview page provides valuable information on troubleshooting and contact
information, should you require technical assistance.
Logs & Reports
- when contacting Axis support, please be sure to provide a valid Server
Report with your query.
View Information - The
Log file, the Server Report and the Parameter List all provide
valuable information for troubleshooting and when contacting Axis support.
Configuration
Log Level for Log Files - from the drop-down list, select the level of
information to be
added to the Log file
Log Level for Email - from the drop-do
wn list, select the level of information to send as
email and enter the destination email address.
To Next Page
Loading...
Need help?
General
