50
AXIS 207W/AXIS 207MW - Technical Specifications
Wireless interface • IEEE 802.11g 6-54 Mbps
• IEEE 802.11b 1-11 Mbps
• RF Output power FCC
• 802.11b: +20dBm (Peak, without antenna gain)
• 802.11g: +22dBm (Peak, without antenna gain)
• RF Output power CE (ETSI)
• 802.11b: +13dBm ±1dBm (Average, w
ithout antenna gain)
• 802.11g: +12.5dBm ±1.5dBm (Average, without antenna gain)
• Receiver Sensitivity: -90dBm at 1Mb
• Channels (US, Canada, Argentina): 11
• Channels (Europe, Australia, Korea, Japan): 13
• Antenna gain: 1.6dBi (Average) 2.14
dBi (Max)
• Infrastructure and ad-hoc modes
Security • Multiple user access levels with password protection
• IP address filtering
• HTTPS encryption
• WEP 64/128 bit, WPA-PSK*, WPA2-PSK*
• Digest authentication
*infrastructure mode only
Users • 10 simultaneous unicast users
• Unlimited users using multicast (MPEG-4)
Alarm and event
managem
ent
• Events triggered by video motion detection, audio detection, external input
• Image upload over FTP, email and HTTP
• Notification via TCP, email, HTTP and external output
• Pre- and post alarm buffering in MPEG-4 file:
AXIS 207W: up to 4 MB
AXIS 207MW: up to 2 MB
Connectors • Ethernet 10BaseT/100BaseTX, Auto-MDIX, RJ-45
• Terminal block for 1 alarm input, 1 output and alternative power connection
Processors, memory,
cloc
k
• CPU, video processing and compression: ARTPEC-A
• RAM: 32 MB
• Flash memory: 8 MB
Power • AXIS 207W: 4.9-5.1V DC, max 3.5 W
• AXIS 207MW: 4.9-5.1V DC, max 4.0 W
Operating conditions • +5 to +50 ºC (+41 to +122 ºF)
• Humidity 20-80% RH (non-condensing)
Installation,
managem
ent and
maintenance
• Installation tool on CD and Web-based configuration
• Configuration backup and restore
• Video management software for recording
• Firmware upgrades over HTTP or FTP,
firmware available at www.axis.com
Video access from
Web browser
• Camera live view
• Video recording to file (ASF)
• Customizable HTML pages
Item Specification
To Next Page
Loading...
Need help?
General
