EasyManuals Logo

Axis 221 Installation Guide

Axis 221
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
AXIS 221/223M Installation Guide Page 11
ENGLISH
Setting the IP address with ARP/Ping
1. Acquire an IP address on the same network segment your computer is connected to.
2. Locate the serial number (S/N) on the AXIS 221/223M product label.
3. Open a Command Prompt on your computer and enter the following commands
(appropriate for your operating system):
4. Check that the network cable is connected to the camera. Start/restart the camera by
disconnecting and reconnecting power.
5. Close the Command prompt when you see ‘Reply from 192.168.0.125: ...’ or similar.
6. Start your browser, type in http://<IP address> in the Location/Address field and press
Enter on your keyboard.
7. See page 12 for instructions on how to set the password.
Notes:
The ARP/Ping command must be issued within 2 minutes of connecting power to the camera.
To open a command prompt in Windows: from the Start menu, select Run... and type cmd (or command in
Windows 98/ME). Click OK.
To use the ARP command on a Mac OS X, use the Terminal utility, which is found under Application > Utilities.
Windows syntax:
arp -s <IP Address> <Serial Number>
ping -l 408 -t <IP Address>
Windows example:
arp -s 192.168.0.125 00-40-8c-18-10-00
ping -l 408 -t 192.168.0.125
UNIX/Linux/Mac syntax:
arp -s <IP Address> <Serial Number> temp
ping -s 408 <IP Address>
UNIX/Linux/Mac example:
arp -s 192.168.0.125 00:40:8c:18:10:00 temp
ping -s 408 192.168.0.125

Other manuals for Axis 221

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Axis 221 and is the answer not in the manual?

Axis 221 Specifications

General IconGeneral
Maximum resolution640 x 480 pixels
Supported video modes-
Video formats supportedMPEG4
Camera shutter speed1/25000 - 2 s
Minimum illumination0.08 lx
Sensor typeCCD
Progressive scanYes
Optical sensor size1/3 \
Optical zoom- x
Focus adjustment1.0
Focal length range3 - 8 mm
Built-in HDDNo
Flash memory8 MB
Internal memory32 MB
TypeIP security camera
CertificationEN 55022 B, EN 55024, EN 61000-3-2, EN 61000-3-3, \\r EN 61000-6-1, EN 61000-6-2, FCC 5 B B, \\r VCCI B, C-tick AS/NZS CISPR22, ICES-003 B, \\r EN 60950-1
Placement supportedIndoor
Connectivity technologyWired
Form factorBullet
Product colorGray
Housing materialAluminum
Ethernet LAN (RJ-45) ports1
Cabling technology10/100Base-T(X)
Supported network protocolsIPv4/v6, HTTP, HTTPS, QoS Layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS
AC input voltage24 V
Power source typePoE
Power consumption (typical)7.5 W
Operating temperature (T-T)0 - 50 °C
Operating relative humidity (H-H)20 - 80 %
Compliance industry standardsIEEE 802.3a
Weight and Dimensions IconWeight and Dimensions
Weight550 g

Related product manuals