About this document
This manual is intended for administ rators and users of the AXIS P1346
Network Camera, and is applicable to firmware 5.40 and later. It
includes instructions for using and managing the product on your
network. Previous experience of networking will be of use when using
this product. Some knowledge of UNIX or Linux-based systems may also
be benefi cial, for developing shell scripts an d applications. Lat er version
of this document will be posted to the Axis website, as required. See
also the product’s online help, available via the web-based interface.
Liability
Every care has been taken in the preparation of this manual. Please
inform your local Axis office of any inaccuracies or omissions. Axis
Communications AB cannot be held responsible for any technical or
typographical errors and reserves the right to make changes to the
product and manuals w ithout prior notice. Axis Communications AB
makes no warranty of any kind with regard to the material contained
within this document, inc luding, b ut not limited to, the implied
warranties of merchantability and fitness for a partic ular purpose. Axis
Communications AB shall not be liable nor responsible for incidental or
consequential damages in connection with the furnishing, performance
or use of this mat eria l. Th is product is only to be used for its intended
purpose.
Intellectual Property Rights
Axis AB has intellectual property rights relating to technology embodied
in the product described in this document. In particular, and without
limitation, these intellectual property right s may include one or mo re
of the patents listed at http://www.a xis.com/patent.htm and one or
more additional patents or pending pat ent applications in the US and
other countries.
This product contains licensed third-party software. See the menu item
“About” in the product’s user interface for more information.
This product contains source code copyright Apple Computer,
Inc.,underthetermsofApplePublicSourceLicense2.0(see
http://www.opensource.ap ple.com/apsl). The source code is available
from http://develop er.apple.co m/darwin/p rojects/bonjour/
Equipment M odifications
This equipment must be installed and used in strict accordan ce with the
instructions given in the user documentation. This equipment contains
no user-serviceable components. Unaut horized equipment changes or
modifications will invalidate all applica b le regulatory certifications
and approvals.
Trademark Acknowledgments
Apple, Boa, Bonjour, Ethernet, Internet E xplorer, Linux, Microsoft,
Mozilla, Real, SMPTE, QuickTime, UNIX, Windows, Windows Vis ta and
WWW are registered trademarks of the respective holders. Java and
all Java-based trademarks and logos are trademarks or registered
trademarks of Oracle and/or its affiliates. UPnP
TM
is a certi fic
ation
mark of the UPnP
TM
Implementers Corporation.
Electromagnetic Compatibility (EMC)
This e quipment has been designed and tested t
ofulfill applica ble
standards for:
• Radio frequency emission when in stalled according to the
instructions an d used in its intended environm en t.
• Immunity to electrical and electromagnetic phenomena when
installed according to the instructions and used in its inten d ed
environment.
USA
Depending on the characteristics of the electrical environment, using
shielded cables (STP) may be a
ppropriate, in which case the fo llowin g
is applicabl e: This equipment has been tested using shielded cables
(STP) and fou nd to comply with the lim its for a Class B digital device,
pursuant to part 15 of the F
CC Rules. These limits are designed
to provide reaso nable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy
and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interfere nce
will not occur in a pa
rticular installat ion. If this equipment does
cause harmful interference to ra dio o r television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect th e equipment into an outlet on a circuit different from
that to which the receiver is co nn ected.
• Consult the dealer or an experienced radio/TV technician for help
Canada
This Class B digital app ara tus complies with Canadia n ICES-003.
Europe
This digital equipment fulfills the req uirements for RF emission
according to the Class B lim it of E N 55022.
This product fulfills the requirements for imm unity according to
EN 61000-6-1 residential, commercial and light-industry environments.
This product fulfills the requirements for imm unity according to
EN 61000-6-2 industrial environments.
This product fulfills the requirements for imm unity according to
EN 55024 office an d commercial environments.
Australia/New Zealand
This digital e quipment fulfills the requirements for RF emiss ion
according to th e Class B limit of AS/NZS CISP R 22.
Korea
이 기기는 가정용(B급) 전자파적합기기로서 주로 가정에서 사
용하는것을목적으로하며, 모든 지역에서 사용할 수 있습니다.
Japan
この装置は、クラスB 情報技術装置です。この装置は、家庭
環境で使用することを目 的としていますが、この装置がラジ
オやテレビジョン受信機に近接して使用されると、 受信障
害を引き起こすことがあります。 取扱説明書に従って正し
い取り扱いをして下さい。
Safety
This product complies to EN/IEC 60950-1, Safety of Information
Technology Equipment.
The power supply u sed with thi s product sh all fulfill the requirements
for Safety E xtra Low Voltage and Lim ited Power Source according to
EN/IEC/UL 60950-1.
Support
Should you require any technical assistance, please contact your Axis
reseller. If your questions cannot be answered immediately, your
reseller will forward your queries through the appropriate channels to
ensure a rapid response. If you are connected to the Internet, you can:
• download user documentation and software updates
• find answers to resolved problems in the FAQ database. Search
by product, category, or phrase
• report problems to Axis support staff by logging in to your private
support area
• chat with Axis support staff (selected countries only)
• visit A xis Support at www.axis.com/techsup/
Learn M ore!
Visit Axis learning center www.axis.com/academy for us eful trainings,
webinars, tutorials and g uides.
To Next Page
Loading...
Need help?
General
