AXIS P1346 Network Camera
Events
Events
The Axis product can be configured to perfo rm actions when different events occur, for exa mple, start a recording w h e n motion is
detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.
Available Action Rule triggers and conditions include:
• Applications — use installed applications to trig ger the rule, see Applications, on page 34.
• Detectors
- Audio Detection — trigger the rule when audio is detected, see Audio detection, on page 33.
- Motion Detection — trigger the rule when motion is detected, see Motion Detection, on page 31.
- Tampering — trigger the rule when tampering is detected, see Camera Tampering, on page 31.
• Hardware
- Network — trigger the rule if network connection is lost or restored . This can for example be used to start
recording to the SD card.
• Input Signal
- Digital Input Port — trigger the rule when an I/O port receives a signal from a connected device, see I/O
Ports, on page 48.
- Manual Trigger — trigger the rule using the Manual Trigger button in the Live View page, see Controls on
the Live View page, on page 12. This can for example be used to validate a c tions during product installation
and configuration.
• PTZ
- Moving — trigger the rule when the camera view moves due to a PTZ operation. This can for example be used
as an additional condition to prevent an action rule triggered by motion detection to record video while the
camera view moves due to a PTZ operation.
- Preset Reached — trigger the rule when the camera
stops at a preset position. This can be for example be used
with the Send Images action to upload images from the preset position.
• Storage
- Available — trigger the rule when the storage device is unmounted or rem oved. This can for example be
used to send maintenance notifications.
- Full — trigger the rule when the storage device is full. Under normal operation, the olde st recordings will be
overwritt
en to prevent the storage device from becoming full.
- Locke
d —triggertheruleifthestoragedeviceislocked(writeprotected).
• S
ystem
- System Initializing — trigger the rule when the product is being started. This can for example be used to send a
notifi
cation when the product restarts.
• Time
- Recurrence — trigger the rule pe riodically, see Recurrences, on page 37. This can for example be used to upload
an image every 5 minutes.
- Use Schedule — trigge r the rule according to the selected schedule, see Schedules, on page 37.
Available actions include:
35
To Next Page
Loading...
Need help?
General
