EasyManuals Logo

Axis P13 Series User Manual

Axis P13 Series
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
AXIS P1346 Network Camera
Recordings
Recordings
TheAxisproductcanbecongured to record video continuously or according to an action rule:
To start a continuous recording, see page 39.
To set up action rules, see page 36.
To access recordings, see Recording List, on page 39.
•Tocongure camera controlled storage, see Storage, on page 47.
Recording List
Recorded videos are listed on the Recordings > List page. The list shows each recording’s start date and time, duration and the
event that triggered the re cording.
To play or download a recording, follow these steps:
1. Go to Recordings > List.
2. Use the lter to narrow the list of recordings. Enter the desired lter criteria and click Filter. Some lters may take
a long time to complete.
3. Select the recording.
4. Click Play to play the recording, or c lick Download to download the recording.
Multiple recordings can be downloaded at the same time. Select the recordings and click Download. The downloaded le is a zip le
containing a minimum of three les, of which the Matroska (mkv) les are the actual recordings. The recordings are time-stamped
with the date and time they were downloaded (that is, not the date the
recordings were made).
Note
To play recordings in Windows M edia Player, AXIS Matroska File Splitte r must be installed. AXIS Matroska File Splitter
can be downloaded from www.axis.com/techsup/software
For detailed recording and video information, select a recording and click Properties.
To remove a recording, select the recording and click Remove.
Continuous recording
The Axis product can be congured to continuously save video to a storage device. See Storage, on page 47 for more information
about storage devices. To prevent the d isk from becoming full, it is recommended to congure the disk to automatically remove
old recordings.
To start a continuous recording, follow these steps:
1. Go to Recordings > Continuous.
2. Select Enabled.
3. Select type of storage device from the Disk lis t.
4. Select a Stream prole to use for continuous recordings.
5. Click Save to save and start the recording.
39

Table of Contents

Other manuals for Axis P13 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Axis P13 Series and is the answer not in the manual?

Axis P13 Series Specifications

General IconGeneral
BrandAxis
ModelP13 Series
CategorySecurity Camera
LanguageEnglish

Related product manuals