Axis P1347 - Detectors; Motion Detection

AXIS P1347 Network Camera
Detectors
Detectors
Camera Tampering
Camera Tampering can generate an alarm whenever the camera is repositioned, or when the lens is covered, sp rayed or severely
defocused. To send an alarm, for example an email, an action rule must be set up.
To configure tamp ering:
1. Go to Detectors > Camera Tampering.
2. Set the Minimum duration, that is, the time that must elapse before an alarm is generated. This can help prevent false
alarms for known conditions that affect the image.
3. Select Alarm for dark images if an alarm should be generated if lights a re dimmed or turned off, or if the lens is sprayed,
covered, or rendered severel y out of focus.
4. Click Save .
To configure the pro duct to send an alarm when tampering occurs:
1. Go to Events > Action Rules.
2. Click Add to set up a new action r ule.
3. Enter a Name for the action rule.
4. Under Condition,selectDetectors from the Trigger list.
5. Select Tampering from the list of detectors.
6. Optionally, select a schedule and set additional conditions.
7. Select the action. To send an email, select Send Notification a
nd select a Recipient from the list of define d recipie nts.
Note
The While the rule is active option under Duration canno t be used with camera tamp ering, since camera tampering does not
have a duration and once it has been triggered it will not automatically return to its untriggered state.
For more information on actio n s rules, see Events, on page 35.
Motion Detection
Motiondetectionisusedtogenerateanalarmwhenevermovementoccurs(orstops)intheview. Upto10IncludeandExclude
windows can be configured:
• Include windows — target specific areas within the whole video image
• Exclude windows —define areas within an Include window that should b e ignored (areas outside Include w indows
a
re automatically ig nored)
Once configured, motion detection windows appear in the list of Detectors in Action rule setup. See Setting Up an Action Rule, on
page 36.
Note
Using the motion detection feature may decrease t he product’s overall performance.
31