Axis P1347 User Manual

AXIS P1347 Network Camera
Hardware overview
Note
For iris lenses not listed in the drop-down list, download the iris configuration fil e from www.axis.com
To upload and use the downloaded configuration file, click the Upload tab. Click Browse and select the configuration
file. Click Upload. The installed iris lens should now be included in the Iris Selection d rop-down list, select it and press
OK. If you select a DC iris configuration file for a P-iris lens, an error message will appear below the iris configuration
type in the Camera Settings page.
9

Axis P1347 Specifications

General

Maximum resolution	2560 x 1920 pixels
Video formats supported	H.264
Camera shutter speed	1/25500 - 1/6 s
Minimum illumination	0.5 lx
Sensor type	CMOS
Optical sensor size	1/2.5 \
Focal length range	3.5 - 10 mm
Video motion detection	Yes
Sample rate	16 kHz
Supported network protocols	IPv4/v6, HTTP, HTTPS, SSL/TLS, QoS Layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS
Power source type	PoE
Power consumption (typical)	0.9 W
Dimensions (WxDxH)	78 x 151 x 46 mm
Processor model	ARTPEC-3
Flash memory	128 MB
Internal memory	256 MB
Compatible memory cards	SD, SDHC
Operating temperature (T-T)	-30 - 50 °C
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Weight	3100 g