Note
The backup extension system controller can’t be reset to factory default settings.
Important
To reset the entire body worn system to factory default settings:
Note
y
Reset system
Never remove or reset the content destination before resetting the body worn
system. Always reset the body worn system first. If you remove or reset the content
destination first, recordings can remain on cameras or in the system controllers,
preventing you from resetting the body worn system. This is a security feature
ensuring that all evidence is uploaded to the content destination.
Never remove cameras or users in the content destination before they’re removed
in AXIS Body Worn Manager.
1. Remove all cameras, see Remove a camera.
2. If possible, disable the corresponding cameras in the content destination.
3. Remove all extension system controllers, see Remove an extension system controller.
4. Go to Support > System reset.
5. Click Reset system.
Remove paired equipment
1. Go to Users.
2. Click the user that you want to remove a pairing from.
3. Locate the equipment that you want to remove, and open the context menu.
4. Click Remove.
To Next Page
Loading...
Need help?
General
