Installation and Basic Operation • 3
Chapter 2
Chapter 2
Installation and Basic Operation
Installation
Carefully unpack all parts, retaining packing materials in case the instrument needs to
be returned to the factory. Use the enclosed shipping list to verify that all parts have
been received.
For the initial checkout, the MultiClamp 700A should be situated on a bench top away
from other equipment. Do not install it in a rack until the checkout is complete.
Check List
These installation and checkout procedures require the following:
1. MultiClamp 700A main unit.
2. Two CV-7A headstages (the MultiClamp 700A with one headstage is optional).
3. Serial control cable (RS232 null modem) and DB9 to DB25 adapter (if necessary).
4. MultiClamp Commander host software (from CD or website).
5. A PC running Windows 95, 98, 2000 or NT, with the display set to at least 800 x
600. The PC should have one spare serial port (USB-to-serial converters
To Next Page
Loading...
Need help?
General
