Azbil AUR355 - Writing Event-Related Items to EEPROM

39
Chapter 6. Details of Functions via Communication
Item name Address Description Sample write command
Product service
life check (total
operating time)
7111 1BC7 0 to FDE8H (0 to 65000 hours) Fixed length continuous data write
command (WD command):
WD1BC7FDE80037
or
WD1BC7FDE8
WD1BC8 0037
Continuous data write command (WS
command):
WS,7111W,65000,55
or
WS,7111W,65000
WS,7112W,55
7112 1BC8 0037H
Product service
life check (total
combustion count)
7113 1BC9 0 to AH (0 to 10 times) Fixed length continuous data write
command (WD command):
WD1BC9000A0038
or
WD1BC9000A
WD1BCA0038
Continuous data write command (WS
command):
WS,7113W,10,56
or
WS,7113W,10
WS,7114W,56
7114 1BCA 0038H

Writing event-related items to EEPROM
Values at addresses 7100–7115 are written to EEPROM.
After changing values at addresses 7100–7115, be sure to write them to EEPROM.
Address Name Description
7200 Write AUR settings to EEPROM
request
5AH: request to write to EEPROM
3CH: writing to EEPROM
completed
After values are written to EEPROM, the values at addresses 7100–7115 change to
zero.
You can check the written values at addresses 7060–7075.
Handling Precautions
• Avoid making frequent requests to write data to EEPROM.
Frequent requests might cause an EEPROM failure.
• Do not turn off this device while data is being written to EEPROM. Doing so
might cause an EEPROM failure.