Introduction
xxiii
Product unpacking, verification, and storage
■ Unpacking
This device is a precision instrument. Handle it carefully in order to prevent accidents,
injuries, etc.
Upon unpacking the product, verify that the following items are included. (When the
device is shipped individually)
• Main unit
• Feedback lever and hex socket head cap bolts (2)
• Hexagonal bar wrench (1) (for feedback lever)
• Regulator (model KZ03) (optional)
• Mounting bracket (optional)
• Flameproof packing cable gland and flame-proof elbow (explosion-proof option)
• User's Manual (this document) (included when specified during purchase)
• Extension lever and two hex socket head cap bolts (optional)
■ Checking specifications
The specifications are written on the nameplate on the body of this device. Referring to
the Appendix, confirm that these are as designated. In particular, be sure to check the
following points.
• Tag number (TAG NO.)
• Model number (MODEL)
• Production number (PROD)
• Input current range (INPUT) (since the input range can be changed using Com-
mStaff, the inscription on the nameplate is fixed to 4 to 20 mA as per explosion-
proofing regulations.
• Supply air pressure (SUPPLY)
• Explosion-proofing test conformity label (if explosion-proofing specification applies)
■ Contact point for inquiries
If anything in the specifications is unclear, please contact the office that appears at the
end of this manual. When making an inquiry, be sure to include the model number
(MODEL) and production number (PROD).
To Next Page
Loading...
Need help?
General
