3-
Authentication to be “Open system”, then this access point is opened for free join.
l Network Name (SSID)
The service serve identify of this access point. The length of the self-naming does not
exceed 32 characters.
l Channel select
You could pick one channel from 1 to 11.
l WEP Encryption
An encryption system prevents eavesdropping on wireless network traffic.
n Enable: The joined wireless station should have same network/password key with this access
point.
n Disable: no network/password key is required for joined wireless station.
l Authentication
The next generation of Wi-Fi security, Wi-Fi Protected Access, or WPA, will use
authentication to verify whether users have access to a particular wireless network.
n Open system: This access point is without authentication protection with user.
n Share key: Any station would join this access point should pass with key same as the setting on
access point.
l Back
Go back to previous step ~ Setup a Wireless Network.
l Next
Go to next step. It depends on the setting of WEP and Authentication.
Authentication
Encryption
Open system Shared key WPA-PSK
WEP WLAN Security
WEP(Disable) Show Network Setting
n/a
l Cancel
Give up current Wi-Set Wizard setup and roll back to previous configuration.
Wireless Network Security
Two types pass key, ASCII and Passphrase, perform security with different level.
l ASCII
To Next Page
Loading...
Need help?
General
