Baby Lock Solaris 2 - Page 171

SEWING STITCH PATTERNS
Character/Decorative Stitches
169
4
d
Press , and then adjust the stitch pattern
with the “Fine Adjust Verti.” or “Fine
Adjust Horiz.” displays.
* If the stitch pattern is bunched:
Touch to increase the number in the “Fine Adjust
Verti.” display.
 The displayed value increases each time the button
is pressed and the stitch pattern will lengthen.
* If the stitch pattern has gaps:
Touch to decrease the number in the “Fine Adjust
Verti.” display.
 The displayed value decreases each time the button
is pressed and the stitch pattern will shorten.
* If the stitch pattern is skewed to the left:
Touch to increase the number in the “Fine Adjust
Horiz.” display.
 The displayed value increases each time the button
is pressed and the stitch pattern will slide to the
right.
* If the stitch pattern is skewed to the right:
Touch to decrease the number in the “Fine Adjust
Horiz.” display.
 The displayed value decreases each time the button
is pressed and the stitch pattern will slide to the left.
e
Sew the stitch pattern again.
* If the stitch pattern still comes out poorly, make
adjustments again. Adjust until the stitch pattern
comes out correctly.
f
Press to return to the original screen.
Memo
• You can sew with the setting screen on the
display.