Baby Lock Solaris 2 - Using the Wizard to Set up the Wireless Network Connection

WIRELESS NETWORK CONNECTION FUNCTIONS
Getting Ready
47
1
Using the Wizard to Set Up the
Wireless Network Connection
There are multiple ways to set up the wireless
network connection. We recommend the method
that uses the wizard on this machine.
a
In order to connect your machine to a
wireless network, the security information
(SSID and network key) for your home
network will be required. The network key
may also be called a password, security key
or encryption key. First, find your security
information and note it.
b
Press beside “Wireless LAN Setup
Wizard”.
 A list of available SSIDs appears.
c
Select beside the SSID that was noted.
 The screen for entering the network key (password)
appears.
SSID
Network Key
(Password)
Memo
• The wireless network connection cannot be
set up if you do not have the security
information.
• How to find the security information
a Check the manual provided with your home
network.
b The default SSID may be the manufacturer's
name or the model name.
c If you cannot find the security information,
contact the manufacturer of the router, your
network administrator or your Internet
provider.
Memo
• If the desired network SSID does not
appear in the list, press .
• If the desired network SSID is not displayed,
specify it as described below.
a Select in the list of SSIDs, and then
press .
b Enter the desired network SSID, and then
press .
c Select the authentication method and
encryption mode.
• If the machine had already been connected
to the home network, press , and
then select the saved SSID.