WIRELESS NETWORK CONNECTION FUNCTIONS
48
d
Enter the network key (password) that was
noted, and then press .
a Text input area
b Character keys
c Caps key
d Space key
e Letters/numbers/symbols key
f Backspace key (Deletes the character at the
cursor's position.)
g Cursor keys (Move the cursor to the left or right.)
e
When the following message appears, press
.
When a connection is established, the following
message appears.
f
Press to exit the setup.
The name beside “Machine name” is the name that will be
used when registering the machine with embroidery editing
software (Palette version 11 or later) in order to transfer files.
■ Using the “Others” Menu
The “Others” menu contains the following items.
a TCP/IP settings can be manually entered.
b Shows the MAC address.
c Use when proxy settings are required.
• The name in the "Machine name" field will
be used with the IQ Intuition Monitoring App
and IQ Intuition Positioning App.
• While connected, the signal strength is
indicated by the icon in the upper-left
corner of the display.
• Once a wireless network connection has
been set up, a wireless network connection
will be established each time the machine is
turned on. However, “Wireless LAN Enable”
in the network settings screen must remain
set to “ON”.
To Next Page
Loading...
