Meter operation / Register operation Page 5/20
OG_IOG_BA_02_1401
Upon initialization and continuation of fluids through the line and meter, the expected
pressures per flow are:
Figure 2: Pressure drop vs. flow
7. Register operation
The following describes register operation and program settings for the industrial oval
gear series registers: Industrial Standard (ILR 700), Industrial Pulse (ILR 710), Industrial
Quadrature/Dual Pulse (ILR 720) and Industrial Analog (ILR 730).
The register display consists of two rows of seven-segment digits, status, unit of
measures, flow rate, and battery indicators. Operating function settings and programming
are provided using the TOTAL and RESET buttons.
Figure 3: Register display and buttons
To Next Page
Loading...
