Baelz Automatic BA 373-E45 - Potentiometer Assembly Installation; Installing the Potentiometer Assembly

BA_373-E45_05_DEF_MJ_2119
13 | 36W. Baelz & Sohn GmbH & Co. · Koepffstrasse 5 · 74076 Heilbronn · Germany · www.baelz.de Seite | Page
1
2
Motorized Linear Actuator baelz 373-E45
6. FITTING THE POTENTIOMETER ASSEMBLY
Disconnect actuator from power supply before starting work!
Danger
6.1 Installing the potentiometer assembly
Fitthedistancesleeve(4)ontothethreadedendofthe
connectingrodandtighten.Placethelaminatewasher(2)over
thethreadedendontotheself-lockingnut.Inserttheposition
detectorforthepotentiometerassembly(3)ensuringitengages
intheslotprovidedonthetoothedrod.
Screwanotherlaminatewasher(2)andself-lockingnut(1)onto
thethreadedinsertandslightlytightenthenut
.
Thepotentiometerassemblycanthenbetted(1)andsecuredwiththescrewsprovided(2)
Fig. 4: Fitting the potentiometer assembly