Baelz Automatic BA 373-E45 - Personnel; Before Starting Work; During Operation; Transport, Installation and Assembly

BA_373-E45_05_DEF_MJ_2119
5 | 36W. Baelz & Sohn GmbH & Co. · Koepffstrasse 5 · 74076 Heilbronn · Germany · www.baelz.de Seite | Page
Motorized Linear Actuator baelz 373-E45
1.3 Personnel
Onlyqualiedpersonnelmayworkonthislinearactuatororinitsvicinity.Qualiedpersons
aredeemedtobepersonswhoarefamiliarwiththeinstallation,assembly,commissioningand
operationormaintenanceoftheactuatorsandhavetheappropriatequalicationsfortheirjob.
Necessaryorprescribedqualicationsinclude,butarenotlimitedto:
● Training/instructionandtheauthorizationtoswitchelectriccircuitsanddevices/
systemsonandoffinaccordancewithEN60204(DINVDE0100/0113)andthe
technicalsafetystandards
● Trainingorinstructioninthecareanduseofappropriatesafetyandworkprotection
equipmentinaccordancewithsafetytechnologystandards.
● Firstaidtraining.
Workinasafemannerandavoidanyoperationthatwouldendangerthesafetyofpersonsor
damagethelinearactuatororotherpropertyinanyway.
1.4 Before starting work
Beforecarryingoutanywork,checkwhetherthetypesspeciedherecorrespondtothe
informationonthenameplateoftheactuator:
baelz 373-E45
1.5 During operation
Safeoperationisonlypossibleiftransport,storage,assembly,operationandmaintenanceis
carriedoutinasafe,properandprofessionalmanner.
1.5.1 Transport, installation and assembly
Observethegeneralinstallationandsafetyregulationsforheating,ventilation,airconditioning
andpipingsystems.Usetoolsonlyfortheirintendedpurpose.Weartherequiredpersonaland
otherprotectiveequipment.
1.5.2 Maintenance and repair
Priortomaintenanceorrepair,makesurethatthelinearactuatorisdisconnectedfrompower
byqualiedpersonnelinaccordancewithDINVDEstandards.Thelinearactuatorrequires
littlemaintenance.Werecommendlubricationofthegearwithgrease(KlüberMicrolubeGL
261)every6monthsandsimultaneousremovalofanydepositsonthespindle.Thisrequires
removaloftheactuatorcover.Apartfromthis,theactuatordoesnotrequireanyotherroutine
orperiodicmaintenance.
1.6 Working environment
Notetheinformationonworkingenvironmentinthetechnicalspecications.