Parameter Descriptions 7-39
F64 Saved up/down frequency
Range: n/a
Default: 0.00
Access Read Only
See also: t1-t8, F63
Notes: F64 viewable when F63 = 1 (Save up/down frequency)
Stores the up/down frequency if F63 = 1 before the drive stops or
decelerates.
F65 Start Frequency
Range: 0.10 to 10.00 [Hz]
Default: 0.5
Access Configurable
The drive starts to output its voltage at this frequency. It is the low frequency
limit.
To Next Page
Loading...
