BALDR B0359WST2H2PR - Manual Settings Configuration; Weekday Language and Beep Settings; Unit and Time Format Settings; Date, Year, and Weather Settings

Manual Settings
* Tips: press and hold “▲/ CH ” or “ ▼/RCC ” button will
quickly change the value by 8 steps.
1. After signal received, if there is no need for other settings,
you can just finish reading here. If there is other setting
requirements. Please check the following steps. Or if there is
no signal received, you can follow bellow steps for Manual Setting.
2. Press and hold “ SET ” button to enter into setting, press “ SET ”
button to skip setting steps or go to the next setting option.
3. Press “ SET ” to select Weekday Language.
Default setting :ENG. Press the “▲/ CH ” or “ ▼/RCC ” button to
select languages: ENG、GER、ITA、FRE、DUT、SPA、DAN
optional . (English/German/Italian/French/Dutch/Spanish/ Danish)
4. Press “ SET ” to select Beep ON/OFF.Default setting:ON. Press
the “▲/ CH ” or “ ▼/RCC ” button to select ON/OFF.
5. Press “ SET ” to select the Barometric Unit. Default setting:hPa mb.
Press “▲/ CH ” or “ ▼/RCC ” button to select unit: mmHg, inHg or
hPa mb optional.
6. Press “ SET ” to select Temperature Unit.Default setting:
︒
C.Press
the “▲/ CH ” or “ ▼/RCC ” button to select
︒
C/
︒
F.
7. Press “ SET ” to select the RCC. Default setting:ON. Press the
“▲/ CH ” or “ ▼/RCC ” button to select OFF or ON.
8. Press “ SET ” to select Year. Setting range: 2000-2099.
Press “▲/ CH ” or “ ▼/RCC ” button to adjust the value.
9. Press “ SET ” to select Month & Date display format.
Default setting : D/M. Press the “▲/ CH ” or “ ▼/RCC ” button to
select M/D or D/M format. (M: Month ,D: Date)
10. Press “ SET ” to select the Month. Press “▲/ CH ” or “ ▼/RCC ”
button to adjust the value.
10