TROUBLE SHOOTING
Problem
Outdoor reading
is flashing or
showing dashes
Flashing of the outdoor reading is generally an
indication of wireless interference.
1. Bring the sensor and main unit indoors,
side by side and remove batteries from
each.
2. Make sure the CH 1-2-3 switch on both
units match.
3. Reload batteries in outdoor sensor.
4. Reload batteries in main unit.
5. Let both units sit within a couple feet of
each other for a few minutes to gain a
strong connection before taking sensor
to outdoor area.
Possible Solution
ADJUSTABLE BACKLIGHT
LOW BATTERY INDICATORS
● After powering on, touch “ ”button to adjust the brightness
of the backlight.
● Backlight brightness can be selected from 3%,10%,50%,100%
and off.
● About Outdoor Sensor: When battery indicator shows next to the
outdoor temperature, replace batteries in your outdoor sensor.
● About Cell Battery in Main Unit: The CR2032 cell battery is only
for memorizing the setting during sudden power outage.
When battery indicator shows next to your Indoor Temperature,
replace battery.
18
To Next Page
Loading...
