● When current outdoor channel’s temperature is in the range of
0°C~ 2.9°C(32°F~37.22°F),the alert symbol “ ” will be flashing
until the temperature reading is out of alert range; the symbol will
keep displaying on screen if temperature is lower than 0°C.
Notes:
1. When in time display mode, press and hold “ALERTS” and
“MEM” button at the same time to enter Calibration mode.
2. Press and release the “SET” button to confirm and move to
the next setting:
Indoor Temperature →Indoor Humidity→ Barometer →Exit.
3. Press “▲/ CH ” or “ ▼/RCC ” button to adjust the value.
4. Barometer range: 850-1050hPa/mb (637-787mmHg,25.1-31 inHg ).
FROST-POINT ALERT
CALIBRATION
Baldr weather stations were calibrated precisely at our
manufacturing facility, but if you want the data of this
product to be consistent with the reading of the
equipment you are more trusted or more used to, you
can manually calibrate the indoor temperature,
humidity and barometer values.
Calibrated value’s reset method: unplug the main unit power supply
at first, remove the cell battery, press and hold the “ ” button, then
power on to reset.
!
17
To Next Page
Loading...
