SNOOZE FUNCTION
Alarm Time Setting
1. When in alarm time display mode ,press “ ” button to select
alarm mode you want (the selecting order is (1-5)→ (6-7)
→ (1-5)→ (6-7)),
then press and hold “ ” button to enter alarm time setting.
2. The setting order is: Hour → Minute→ON/OFF→Exit.
3. Press “▲/ CH ” or “ ▼/RCC ” button to adjust the value.
Hold to adjust quickly.
4. To set other three alarm time, please repeat the above steps.
5. During setting, touch top button to save and exit setting.
6. During setting, if no operation for 20 seconds, it will automatically
save and exit setting.
7. Alarm symbol will display on screen after setting.
1. When the alarm is ringing, press any other button except top
button to stop the alarm. And the alarm will restart next day.
2. Or when alarm is ringing, press the “ ” button to activate
snooze function. The alarm will ring again in 5 minutes snooze
interval. And the “ ” symbol will be flashing on screen to indicate
the snooze mode. Press any other button except top button to exit
the snooze mode. And the alarm will restart next day.
3. When alarm rings, the related alarm mode’ symbol will flashing
and ascending “Bibi” alarm sound will last for 2 minutes if no
operation.
12
To Next Page
Loading...
