Balluff BTL7-A5 M Series User Manual

www.balluff.com 3english
BTL7-A/C/E/G5_ _-M_ _ _ _-J-DEXC-TA12
Magnetostrictive Linear Position Sensor – Rod Style
Type of protection “db” and “ta”
Flameproof enclosure
1
Notes to the user 5
1.1 Validity 5
1.2 Scope of delivery 5
1.3 Qualified personnel 5
1.4 Languages 5
1.5 Symbols and conventions 5
1.6 Explanation of the warnings 5
1.7 Disposal 5
2
EX safety notes 6
2.1 Intended use 6
2.2 Reasonably foreseeable misuse 6
2.3 Safety measures 6
2.4 Approvals, standards, and conformity 6
2.5 Use and inspection 7
2.5.1 Device category and suitability 7
2.5.2 IECEx certificate of conformity 8
2.5.3 Special conditions (“X” symbol) 8
2.5.4 Operator documents 8
2.6 Assembly, installation, and setup 8
2.7 Maintenance, inspection, repair 8
3
Construction and function 9
3.1 Construction 9
3.2 Function 10
4
Installation and connection 11
4.1 Minimum distance to fixed obstacles 11
4.2 Application1: outside zone0 11
4.2.1 Installation guidelines 11
4.2.2 Preparing for installation 11
4.2.3 Installing the BTL 12
4.3 Application2: fill level measurement in zone0 12
4.3.1 Preparing for installation 12
4.3.2 Installing the linear position sensor 12
4.4 Replacing electronics module 14
4.5 Electrical connection 14
4.6 Shielding and cable routing 15
5
Startup 16
5.1 Starting up the system 16
5.2 Operating notes 16
6
Calibration procedure 17
6.1 Calibration device 17
6.2 Programming inputs 17
6.3 Calibration procedure overview 18
6.3.1 Teach-in 18
6.3.2 Adjusting 18
6.3.3 Online setting 19
6.3.4 Reset 19
6.4 Selecting the calibration procedure 19
6.5 Calibration procedure notes 20

Balluff BTL7-A5 M Series Specifications

General

Brand	Balluff
Model	BTL7-A5 M Series
Category	Transducer
Language	English