B&G Network DEPTH - Setting the Depth Units

SETTING THE DEPTH UNITS
The Network QUAD unit can be set to display depth in
Metres, Feet or Fathoms. The selected units are used for
displayed depth information on all Network instruments on
the entire Network system.
Press
DEPTH
key
to display the
current depth.
Press
SETUP
key
twice. The depth
display will go
blank.
Press
ENTER
key
if the units are to
be changed.
Use
S
or
T
to
change the units.
Press
ENTER
key
to memorise the
change.
Press
DEPTH
to
display current
depth.
610-HB-0503-05
19
www.bandgservice.co.uk