B&G Network DEPTH - Enabling;Disabling the Deep Alarm; Adjusting the Deep Alarm Value

ENABLING/DISABLING THE DEEP ALARM
Press
DEPTH
key
to display the deep
alarm.
Press
SETUP
key,
the alarm state will
be displayed.
Press
ENTER
key,
the alarm state
display will flash.
Use
S
or
T
to
enable/disable the
alarm.
Press
ENTER
to
memorise the
change.
Press
DEPTH
key,
the current value is
displayed.
ADJUSTING THE DEEP ALARM VALUE
Press
DEPTH
key
to display the deep
alarm.
Press
SETUP
key
twice, the value is
displayed.
Press
ENTER
key,
the value display
will flash.
Use
S
or
T
to
adjust the value.
Press
ENTER
key
to memorise the
new value.
Press
DEPTH
key,
the value is
displayed and the
alarm enabled.
610-HB-0503-05
22
www.bandgservice.co.uk