Introduction
The Triton
2
is a networked multifunction instrument. The display
shows data measured by sensors and other equipment connected
to the system.
The unit calculates speed, wind, trip distance and time, average
speed, set and drift. A race timer is also included.
If a compatible autopilot computer is connected to the network, the
Triton
2
will also display autopilot status.
The autopilot can be controlled by the optional Triton
2
Pilot
controller. The Triton
2
can then be used as the autopilot display, and
full autopilot functionality will be available.
Manuals
The following documentation is available for the Triton
2
system:
•
Triton
2
Operator manual (988-11214-00n) - this manual
•
Triton
2
Quick guide (988-11219-00n)
•
Triton
2
Pilot controller User Guide (988-11224-00n)
•
AP44/IS42/Triton
2
Installation guide (988-11229-00n)
•
AP44/IS42/Triton
2
Mounting template (988-11230-00n)
•
OP12/Triton
2
Autopilot controller Mounting template
(988-11231-00n)
• H5000 Installation manual (988-10635-00n)
• NAC-2/NAC-3 Autopilot computer Commissioning manual
(988-11233-00n)
• AC12N/AC42N Installation manual (988-10276-00n)
Ú
Note: The last digit in the part numbers is the document's
revision code. The latest version of all documents can be
downloaded from the product website on www.bandg.com.
1
Introduction | Triton2 Operator manual
7