Selecting a device in this list will bring up additional details and
actions:
All devices allow allocation of an instance number in the configure
option. Set unique instance numbers on any identical devices on
the network to allow for the unit to distinguish between them. The
data option shows all data being output by the device. Some
devices will show additional options specific to the device.
Ú
Note: Setting the instance number on a 3rd party product is
typically not possible.
Diagnostics
The NMEA 2000 tab on the diagnostics page can provide
information useful for identifying an issue with the network.
Ú
Note: The following information may not always indicate an
issue that can be simply resolved with minor adjustment to
network layout or connected devices and their activity on the
network. However, Rx and Tx errors are most likely indicating
issues with the physical network, which may be resolved by
correcting termination, reducing backbone or drop lengths, or
reducing the number of network nodes (devices).
70
Software setup | Triton2 Operator manual
To Next Page
Loading...
Need help?
General
