The software version for connected NMEA 2000 sensors is available
in the Device list.
The latest software is available for download from our website:
www.bandg.com.
Software update for the unit
1. Download the latest software from our website:
www.bandg.com, and save it to a USB device
2.
Insert the USB device to the Triton
2
unit, and restart the Triton
2
unit
- The upgrade will now start automatically the upgrade
procedure for all units
3. Remove the USB device when the update is completed.
Warning: Do not remove the USB device until the
update is completed. Removing the USB device before
the update is completed may damage the unit.
76
Maintenance | Triton2 Operator manual
To Next Page
Loading...
Need help?
General
