Bandit 2890SP - Page 48

Bandit
42
Copyright 12/17
MODELS 2890SP/2900T
Use as a reference only, locations may vary depending on options or component manufacturer.
Lubrication point instructions are described on the machine, in the Lubrication & Coolant
Section and Maintenance Section of this manual, or component manufacturer’s manual.
NOTICE
MAINTENANCE
LUBRICATION CHART - 2900T

        
parts stores.
CHECK
# DESCRIPTION DAY WEEK MONTH PROCEDURE
1 Cutter Wheel Arm Pivot Bushings X 󰀨
2 Track Expansion Assembly X Lubricate with dry lube
3 Grinder Bearings (Belt Driven) X 󰀨
4 Swing Pivot Assembly Bushings X 󰀨
5 Cylinder Lug Pin Bushing X 󰀨
6
Steel Friction Areas: pivoting,
hinged, sliding, rolling
X
Lubricate (i.e. cutter wheel guard,
control box doors
7 Grading Blade Pivot Bushings X 󰀨
8 Tracks
Per MFG’s Instructions
5
5
4
5
5
5
6
6