Banner Sure Cross DXM700-Bx - Display Lock Feature; Modbus Registers for LCD Board (Slave ID 201)

Sript
Displays the name of the ScriptBasic file running.
LCD Board
Displays the serial number, model, date, firmware part numbers, and version numbers.
6.7 Display Lock
Display Lock protects the DXM LCD menu system from being used until the proper pass code is entered.
Figure 30. Display Lock menu
Display Lock
Enter password
>> x
to change the value
to accept
ENTER
BACK
to return to the previous menu
↑
↓
The display lock feature uses the configuration software to set a passcode within the DXM. A valid passcode is 1 to 9 digits
long and uses numbers 0 through 9. For example 1234 or 209384754.
6.8 Modbus Registers for the LCD Board (Modbus Slave ID 201)
Control the four bi-color LEDs using the display board's Modbus registers. Using write maps or ScriptBasic, write the Modbus
registers shown below with 0 (off) or 1 (on). The LCD display is Modbus Slave 201.
Modbus Registers for the LCD Board (Modbus Slave ID 201)
Modbus Register LED Color State
1102 : bit 0 LED 1 Red
1 = On
0 = Off
1103 : bit 0 LED 2 Amber
1104 : bit 0 LED 3 Red
1105: bit 0 LED 4 Amber
1107: bit 0 LED 1 Green
1108 : bit 0 LED 2 Green
1109 : bit 0 LED 3 Green
1110 : bit 0 LED 4 Green
Sure Cross
®
DXM700-Bx Wireless Controller
42 www.bannerengineering.com - Tel: + 1 888 373 6767