Register Mapping
• Cyclical Read rules from wireless devices or local
wired Modbus devices that include optional scaling,
error conditions, and the ability to activate a read rule
• Cyclical or Change of State Write rules to wireless
devices or local wired Modbus devices with scaling
• Modbus/TCP Master Read or Write rules for external
devices on the network
Action Rules
• Thresholds (IF/THEN/ELSE) with timers, minimum
on/off time, and logging options
• Math/Logic Rules (arithmetic and bitwise operators)
• Control Logic (logical operators and SR/T/D/JK flip
flops)
• Trending (multiple averaging filters)
• Tracking (counts, on/off times)
• Email notifications
• Push data on conditions
Scheduler
• Time/calendar-based events
• Holiday skips
• One-time events
• Dynamic scheduler updating
• Astronomical clock
Optional Text Programming Language
• ScriptBasic to create variables, arrays, functions,
loops, IF/THEN/ELSE, logical and arithmetic
operators, API commands, register access, string
functions and operators, time commands
Data Logging
• Cyclic data/event logging
• Email log files
User Interface— A simple user interface consists of an LCD screen and four LED indicators.
User programmable LCD
• Bind Sure Cross radios
• Conduct a site survey to evaluate the radio signal
integrity of radios within the network
• View register and output information
• View system status and configuration
API Interface
• Host Initiated control
• Web service integration
User Defined LED indicators
• Indicates the status of the DXM700, processes, or
equipment
1.1 DXM Hardware Configuration Overview
The DXM700-Bx Wireless Controller can have multiple configurations. The DXM700 will have a model number label on the
housing. Use the model number and model table above to identify which boards are included in the controller.
When opening the DXM700, follow proper ESD grounding procedures.
Important:
• Electrostatic discharge (ESD) sensitive device
• ESD can damage the device. Damage from inappropriate handling is not covered by warranty.
• Use proper handling procedures to prevent ESD damage. Proper handling procedures include
leaving devices in their anti-static packaging until ready for use; wearing anti-static wrist straps; and
assembling units on a grounded, static-dissipative surface.
The top housing contains the LCD display board. The display board is connected to the base board using a ribbon cable with
a 20 pin connector.
Sure Cross
®
DXM700-Bx Wireless Controller
www.bannerengineering.com - Tel: + 1 888 373 6767 5
To Next Page
Loading...
