Banner SureCross DX80 - Dx80; Industrial Ethernet Wiring; Dimensions; Gateways and Nodes

2.5.3 DX80...C Wiring
Wiring power to the DX80...C models varies depending the power requirements of the model. Connecting dc power to the
communication pins (Tx/Rx) causes permanent damage. For FlexPower devices, do not apply more than 5.5V to the B+
terminal.
Terminal La-
bel
Gateway, DX85 10–30V dc Powered Nodes Battery Powered Nodes
V+ 10–30V dc 10–30V dc
Tx/+ RS485 / D1 / B / +
V- dc common (GND) dc common (GND) dc common (GND)
Rx/- RS485 / D0 / A / -
B+ 3.6–5.5V dc
2.5.4 Industrial Ethernet Wiring
Use the 4-pin industrial Ethernet connection to connect the radio network to an Ethernet-based host system.
Wire No.
Wire Color Description
1 White/Orange +Tx
2 White/Blue +Rx
3 Orange -Tx
4 Blue -Rx
2.6 Dimensions
The DX80, DX83, and DX70 models all share the same housing and mounting hole dimensions.
2.6.1 Gateways and Nodes
The DX80 and Performance DX80 Gateways and Nodes have the same external and mounting dimensions.
SureCross DX80 and Performance DX80 Product Manual
Rev. J www.bannerengineering.com - tel: 763-544-3164 11