Banner SureCross DX80 - Modbus;Tcp and Ethernet;Ip; Host Connected - DX80 Gatewaypro

6.3 Modbus/TCP and EtherNet/IP
6.3.1 Host Connected - DX80 GatewayPro
Connect a GatewayPro to a host system using the GatewayPro's industrial Ethernet connection.
To connect the GatewayPro directly to the host system, use a crossover cable. By default, the GatewayPro is a
Modbus/TCP or EtherNet/IP
™
server. To configure the GatewayPro as a Modbus client device, use the configuration Web
pages.
1
Wireless Network
Host System
2
3
1
Wireless Network
3
1
Host System
5
4
3
Wireless Network
Item
Model No. Description
1 DX80P**6S DX80 or DX80 Performance GatewayPro, Protocol converter or Advanced Config mod-
els
2 BWA-EX2M Ethernet Cable, M12 Industrial/RJ45, Crossover, 2 m (using Modbus/TCP or
EtherNet/IP)
3 DX80N... DX80 or DX80 Performance Nodes or FlexPower Nodes
4 BWA-E2M Ethernet Cable, M12 Industrial/RJ45, Straight, 2 m
5 Ethernet hub or switch box
SureCross DX80 and Performance DX80 Product Manual
Rev. J www.bannerengineering.com - tel: 763-544-3164 61