The Web home page for the Ethernet Bridge or GatewayPro displays.
2. Click on any tab at the top of page to log into the configuration software.
3. Enter system as the user name and admin as the password.
After making your changes and saving the file, close the browser to log out of the configuration system.
5.2.2 Changing the IP Address
Use the page tabs at the top of the page to select the hierarchical path: System > Setup > Network . To change the IP
address, type in the new IP address and click the Change IP button. The IP address change activates when the Ethernet
Bridge or GatewayPro reboots (cycles power).
Important: Verify the new IP address is correct before cycling power to the device. After the IP ad-
dress is changed, you must enter in the new IP address to access the Web page-based configuration
screens. Write down the new IP address (and any other changed parameters on this screen) or print
this page and file for your record.
SureCross DX80 and Performance DX80 Product Manual
40 www.bannerengineering.com - tel: 763-544-3164 Rev. J
To Next Page
Loading...
