EasyManua.ls Logo

Banner SureCross DX80 - Sensors with a Serial Interface

Banner SureCross DX80
109 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Model No. Description Datasheet
QS30WEQ
WORLD-BEAM Photoelectric Emitter, QS30 (Max Range: 100
feet, 10x excess gain at 50 feet), 1-wire serial interface
140987
QS30WRQ
WORLD-BEAM Photoelectric Receiver, QS30 (Max Range:
100 feet, 10x excess gain at 50 feet), 1-wire serial interface
M12FTH3Q
Temperature and Humidity Sensor, RS-485 Modbus inter-
face
163751
M12FT3Q Temperature Sensor, RS-485 Modbus interface
11.4 Other Sensors
Other sensors or sensor components include:
Model No. Description
BWA-THERMISTOR-001 NTC Thermistor, 2 KOhms, +/-0.2%C
BWA-S612-30-100
NoShok Series 612 Submersible Level Transmitter, model 612-30-1-1-N-100, 0 to 30 psig,
100' cable
BWA-S612-15-100
NoShok Series 612 Submersible Level Transmitter, model 612-15-1-1-N-100, 0 to 15 psig,
100' cable
BWA-625-5000-1-1-8-25
NoShok Series 625 Intrinsically Safe Pressure Transmitter, model 625-5000-1-1-8-25, 0 to
5000 psig, 1/2" NPT,4–20mA, M12 QD
BWA-625-10000-1-1-8-2
5
NoShok Series 625 Intrinsically Safe Pressure Transmitter, model 625-10000-1-1-8-25, 0 to
10000 psig, 1/2" NPT, 4–20mA, M12 QD
BWA-P-RKGV
5.33T-1727-2.0
Cable, female M12 4-pin, blue PVC, SS connector, for NoShok Series 625 IS Pressure Trans-
mitter
BWA-ACC-SEN-SDI Acclima SDI-12 Soil Moisture Transducer
11.4.1 Sensors with a Serial Interface
The following sensors are designed to be used with any of the 1-Wire Serial Interface FlexPower Nodes.
Sensors
Model No. Description Datasheet
M12FTH4Q
Temperature and Humidity Sensor, ±2% Accuracy, 1-wire
serial interface
162669
M12FT4Q Temperature Sensor with 1-wire serial interface
SureCross DX80 and Performance DX80 Product Manual
90 www.bannerengineering.com - tel: 763-544-3164 Rev. J

Table of Contents

Other manuals for Banner SureCross DX80

Related product manuals