The LCD displays the text shown. While
Channel Search Mode runs, LED 1 is solid
red and LED 2 flashes yellow.
The device tests Network ID 2 for availability
and counts down from one minute, zero
seconds.
The selected Network ID is available for use.
LED 1 is solid red, LED 2 is solid yellow.
START
CHANNL
SEARCH
MODE
SEARCH
NID 2
1M 0S
Is the NID in
use?
No
Yes
NID OK
RUN
CUR 2
NEW 2
Select new NID
Single click
button 2
IGNORE
Double click
button 2
ABORT
Double click
button 2
Apply power
to the Gateway
To cancel Channel
Search Mode
To ignore Channel
Search Mode results
To Next Page
Loading...
