aAOFENO
www.baofengradio.us
http://www.baofengradio.us
www.foscam.us
Basic Use
4. When entering the final four digits, note that only three decimals can be entered
on the keypad. If 6875 is typed, it won't work as the last digit is omitted.
5. By rounding 145.6875 up to 145.6880, the frequency can now be entered.
6. Enter [6] [8] [7] on the numeric keypad, it should look something like this:
Note: Just because programming is enabled in a channel does not mean
authorization is granted for use of that frequency.
Transmitting on frequencies without authorization is illegal, and in most jurisdictions
is a serious offence. If caught transmitting without a license, fines can be levied, and
in some cases jailtime.
However, in most jurisdictions it is legal to listen. Contact your local regulatory entity
for further information on what laws, rules and regulations apply in your area.
Channel Mode (MR)
The use of Channel (MR) mode is dependent on having previously programmed in
some channels for use. To learn how to program channels, reference Section 4,
Subsection G Programming in this manual.
Once the channels are programmed and ready, the [UP] and [DOWN] buttons can
be used to navigate between channels.
Note: If you have channels programmed with Transmit power set to Low, you can
use the [POUND] button to momentarily switch over to high power if you're having
trouble getting through.
21
aAOFENE
www.baofengradio.us http://www.baofengradio.us
www.foscam.us
Menu Definitions
Menu Item Shortcut
Description
VOICE 14
VOICE Prompt: Allows audible voice confirmation of a button
press.
Availability: Global
Settings/Notes
(SSBFB238) OFF [0] | ON [1] Default: ON
(=s BFB251) OFF [0] | ENG [1] | CHI [2] Default: CHI
Note: Not all voice prompts are easily understandable. Not all button presses have a
voice prompt.
Menu Item
ANI-ID
Shortcut
15
Description
Automatic Number Identification — ID: Displays the ANI code
that has been set by software. This menu can not be used to
change it. The ANI-ID is sent when the alarm is activated and
menu 32 = CODE
Availability: MR/Channel Mode (Read Only)
Settings/Notes
N/A
50
To Next Page
Loading...
