“Transmission failed and inhibited”. It can be activated by SMS writing frequency or wake-up.
Note: This function works only if the function is set and turned on by writing-frequency software.
■Contact list settings
Contact list provides "Address Book" for handheld walkie-talkies. Each entry corresponds to an alias or ID used
to initiate the call. In addition, each entry is related to one of three types of call depending on the setting: group
call, single call, all call. Your walkie talkie supports digital contacts.
The entry in the contact list shows the following information:
• Call type
• Call alias
• Call ID
You can add, delete, or edit contacts to your digital contact list.
■Group call from the contact lists
1. Press 【MENU】 key to enter the menu mode.
2. Press 【】/【】 key to contact list, then press 【MENU】 key to select, the items will be arranged in
alphabetical order.
3. Press 【】/【】 to the desired group name or ID.
4. Hold the walkie talkie in its upright position and keep it at a distance of 1 to 2 inches (2.5 to 5.0 cm) from the
mouth.
5. Press 【PTT】 key to initiate a call, LED indicator light is red. The screen displays the talk group alias or ID, as
well as the group call icon.
6. Release the [PTT] key to receive. When any user in the group responds, the LED will light green. You will see the
group call icon user ID on the screen.
7. If the "Channel Idle Tone" feature is enabled, when the target radio releases the [PTT] key, you will hear a short
beep indicating that the channel is free for you to answer. Press the call key (PTT) to answer. If there is no voice
activity during the preprogrammed group call hang-up time, the call is terminated.
■Single call from your contact list
1. Press 【MENU】 key to enter the menu mode.
2. Press 【】/【】 key to contact list, then press 【MENU】 key to select, the items are arranged in alphabetical
order.
3. Press 【】/【】 to the desired user alias or ID.
Or press 【】/【】 key to dial manually, then press 【MENU】 key to select. If there is a user alias or ID dialed
previously, the ID is displayed with the blinking cursor and the keyboard is used to edit this ID.
Or press 【】/【】 key to dial manually, then press 【MENU】 key to select, use keyboard to input a new ID.
4. Hold the walkie talkie in its upright position and keep it at a distance of 1 to 2 inches (2.5 to 5.0 cm) from the
mouth.
5. Press 【PTT】 key to initiate a call, LED indicator light is red. The first line shows the user's alias or ID, the
second line shows the single and single call icons.
6. Release the [PTT] key to answer. When the radio responds, the radio LED lights up green and the screen
displays the ID of the transmitting user.
7. If the "Channel Idle Tone" feature is enabled, when the target radio releases the [PTT] key, you will hear a short
beep indicating that the channel is free for you to answer. Press the call key (PTT) to answer. If there is no voice
activity during the preprogrammed single call hang-up time, the call is terminated.
To Next Page
Loading...
