8. The screen back to the upper menu automatically.
• Even when the radio is turn off, the radio is kept off-line situation.
Radio tone/Prompt tone
Including below options:
• All tones
• Call permission
• Keyboard tones
All tones
If necessary, you can start or stop all the radio tones and prompt tones (except the emergency tones)
Turn on or turn off all the radio tones according to the all tones on/off by pre-programmed.
The menu function operated as below:
1.Press the【MENU】button to enter into the MENU mode.
2.Press the【】/【】button to setting, then press the【MENU】button to make a choice.
3.Press the【】/【】button to radio setting, then press the【MENU】button to make a choice.
4.Press the【】/【】button to tone/prompt one, then press the【MENU】button to make a choice.
5.Press the【】/【】button to all tones, then press the【MENU】button to make a choice.
6.Press the【MENU】button to choose turn on, then all the tones and prompt tones started, the screen indicates”
All tones applied”
• Or press the 【MENU】button the choose turn off, then all the tones and prompt tones turned off, the
screen indicates “All tones cancelled”
Turn on or off the keyboard sound
If needed, you can activate and deactivate keyboard sounds of keystrokes. The menu functions as follows:
1. Press【MENU】to enter menu mode.
2. Press【】/【】to set, then press【MENU】to select.
3. Press【】/【】to the radio setting, then press【MENU】to select.
4. Press【】/【】to tone/hint, then press【MENU】to select.
5. Press【】/【】to keyboard sound, then press【MENU】to select.
6. Press【MENU】and select open, then turn on keyboard sounds, and screen will display "keyboard sound
application".
• Press【MENU】and select close, then turn off keyboard sounds, and screen will display "keyboard sound
cancellation"
Setting transmitting Power
This function can achieve quick switch of high/medium/low power. When communication distance meets your
requirements, low power can be selected to save power. When low power does not enable you to communicate
with other walkie-talkies away from distance, and then please choose high power.
According to the preprogrammed [Power Level Adjustment] shortcut keys, switch transmitting power of the
current channel between high, medium and low. You can set the transmitting power level of each channel to be
To Next Page
Loading...
