keyboard tone is on, a bass tone sounds.
■Calling prompt operation
Call Alert Allows you to prompt a specific walkie talkie user to call you back when possible.
This feature is only available for user aliases or IDs, and can be accessed via the menu via Contacts or Manual
Dialing.
■Receive and confirm call prompt
When you receive a call alert, the screen displays a call alert, alternating with the alias or ID of the calling
walkie-talkie.
1. You will hear a repeat tone. The LED flashes red.
2. Press and release the [PTT] key to confirm the prompt, or press the [MENU] key to select "Ignore?" To ignored
the call prompt.
■Initiate a call alert from the communication list
1. Press 【MENU】 key to enter the menu mode.
2. Press 【】/【】 key to address book, then press 【MENU】 key to select.
3. Press 【】/【】 key to the desired user alias or ID, then press 【MENU】 key to select.
Or press 【】/【】 key to manually dial, then press 【MENU】 key to select, flashing cursor appears, input
the user ID you want to call, then press 【MENU】 key.
4. Press【】/【】 key to call the prompt, the screen displays the call prompt: <User alias or ID>, and then press
the [MENU] key to indicate that the call has been sent.
5. When the walkie talkie send a call alert, the LED indicator light is red.
6. If you receive a call confirmation, a tone sounds and a call alert appears.
Or if no call alert confirmation is received, a beep sounds and the screen displays a call alert failure.
■ SMS Function
This product supports DMR data function, and allows sending and receiving messages; the maximum length of
each message is 144 characters. And SMS lines cannot be more than 50 lines.
■ Edit and Send Messages
Use the MENU function:
1.Press the【MENU】button to enter into the MENU mode.
2.Press the【】/【】button, Select “SMS “,press the【MENU】button to make a choice.
3.Press the【】/【】button, Select “Write SMS”, press the【MENU】button to make a choice.
4.When blinking cursor appears, input the SMS by the keyboard, press the【】button to move to left one, press
the【】button to move to right one.
press【BACK】button to delete any useless character when there are contents in the edit area, or else it will return
to the upper menu when there is no content in the edit area.
5.After finish the SMS content, press the【MENU】button to send or save.
6.When editing the SMS content, by pressing the【MENU】button to clear the options and clear all the edited
contents, can return to the upper menu firstly.
7.After send, press the【】/【】button to the required name or ID, then press the【MENU】button to make
a choice.
Or press the【】/【】button to Manual Dialing, then press the【MENU】button to make a choice, input the
user ID and press the【MENU】button.
To Next Page
Loading...
